Product Description

Custom Printed Heras Fence Banners

Turn temporary fencing into valuable advertising space with our custom printed Heras fence banners.

Designed specifically to fit standard 3.5m × 2m Heras fencing panels, these large-format mesh banners are ideal for construction sites, building developments, events, festivals, sporting venues and temporary site boundaries.

Printed in full colour with your own artwork and branding, they provide a professional way to improve the appearance of temporary fencing while promoting your business, development, sponsors or event.

Made to Fit Standard Heras Fencing

Our standard Heras fence banner measures:

3375mm wide × 1780mm high

This size is designed to sit neatly inside the outer frame of a standard 3.5m × 2m Heras fencing panel.

The banner can then be secured to the fencing using bungee ball ties, helping create a clean and professional finished display.

Round-Top & Square-Corner Options

Different styles of Heras fencing are available, so we offer two banner configurations.

For round-top Heras fencing panels, the banner can be manufactured with a 130mm angled corner, helping it follow the shape of the panel more closely.

For conventional square panels, a square-corner version is also available.

340gsm Mesh Banner Material

Our Heras fencing banners are printed on either:

• 340gsm Mesh PVC
• PVC-Free Mesh

The mesh construction allows air to pass through the banner while still providing a highly visible printed advertising surface.

The material provides approximately 25% airflow, making it more appropriate for exposed fencing applications than a completely solid banner material.

Why Use Mesh on Heras Fencing?

Temporary fencing can be exposed to wind, particularly on open construction sites, developments and event locations.

A solid banner creates a large continuous surface, whereas mesh contains small openings that allow some air to pass through the graphic.

This helps reduce wind loading compared with a solid PVC banner.

Mesh does not make an installation windproof, however. The fencing, banner and fixings must still be installed appropriately for the location and weather conditions.

High-Quality Full-Colour Printing

Your Heras banners are printed in full colour using UV-based inks, providing strong, vibrant graphics for outdoor advertising applications.

Your artwork can include:

• Company branding
• Development visuals
• Contractor logos
• Sponsor branding
• Promotional messages
• Safety messaging
• Event information
• Website addresses
• QR codes
• Contact details

This turns otherwise plain temporary fencing into a large branded advertising space.

Fire-Rated Mesh Material

Our standard Heras banner material is available with an M1/B1 fire rating.

If your project or site requires a specific fire classification, please let us know before ordering so we can ensure the appropriate material is selected.

Where Are Heras Fence Banners Used?

Printed Heras fencing banners are particularly popular for:

• Construction sites
• Building developments
• Property developments
• Outdoor festivals
• Music events
• Sporting events
• Temporary event fencing
• Crowd-control areas
• Conventions
• Promotional sites
• Site perimeter branding

They can help turn temporary fencing from a purely functional requirement into useful advertising, branding and communication space.

Construction Site Advertising

Heras banners are particularly effective on construction and development sites.

Long stretches of temporary fencing can provide significant advertising space for:

• Developers
• Main contractors
• Architects
• Estate agents
• Construction companies
• Project partners
• Future tenants
• Sponsors

They can also be used to display development visuals and help improve the appearance of a site perimeter.

Heras Banners for Events

Temporary Heras fencing is also widely used at festivals, sporting events and outdoor venues.

Printed graphics can transform these barriers into part of the event branding and provide space for:

• Event logos
• Sponsor advertising
• Directional information
• Promotional messages
• Visitor information

Using consistent artwork across multiple panels can create a much more professional-looking event environment.

Using Graphics on Both Sides

Two banners can be fitted to one Heras fencing panel — one on each side.

However, because the material is mesh, some show-through from the opposite graphic may be visible.

If graphics are being fitted to both sides of the same panel, this should be considered when choosing artwork, colours and positioning.

Bespoke Heras Banner Sizes

Although our standard banner is designed around the common Heras fencing size, we can also manufacture custom-sized mesh banners.

If your fencing, panels or installation differs from the standard dimensions, contact us with the required size and we can advise on an appropriate solution.

Multi-Panel Heras Fence Graphics

For larger developments, events or site perimeters, graphics can also be produced to extend across multiple Heras fencing panels.

A continuous design can create a particularly striking visual effect across a long run of fencing.

As a general guide, the overall banner width should normally be no more than approximately 30 metres.

Very long banners will usually need to be printed in separate sections and welded together to create the finished graphic.

If you're planning a large multi-panel installation, contact us before ordering so we can discuss the dimensions and artwork setup.

Fixing Heras Fence Banners

Our standard Heras banners can be secured using bungee ball ties.

Elasticated fixings provide some movement between the banner and the fencing and can help reduce direct stress on individual fixing points.

Make sure the banner is attached evenly around its perimeter rather than relying on only a small number of fixing points.

The fencing itself must also be correctly installed and sufficiently stable for the conditions.

Choosing Artwork for Heras Fencing

Heras banners are normally viewed from several metres away, so designs often work best when they're clear and uncomplicated.

Consider using:

• Large logos
• Strong brand colours
• Short headlines
• Clear calls to action
• Large contact information
• Simple photography
• Easily scanned QR codes

Avoid filling the banner with small text that will be difficult to read at normal viewing distance.

Why Choose Sussex Banners?

With over 30 years of experience in large-format printing, Sussex Banners produces custom outdoor graphics for businesses, construction companies, developers, events and organisations throughout Sussex and across the UK.

Our Heras banners can be produced in standard or bespoke dimensions, with options for both conventional and round-top fencing panels.

Whether you need a single branded panel or a coordinated graphic running across a large site perimeter, we can produce the banners to suit your artwork and installation.

Frequently Asked Questions

What size is a standard Heras fence banner?

Our standard Heras fence banner is 3375mm × 1780mm, designed to fit inside the frame of a standard 3.5m × 2m Heras fencing panel.

What material are Heras fencing banners printed on?

They are available in 340gsm Mesh PVC or PVC-Free Mesh.

Why is mesh used for Heras fencing?

Mesh allows approximately 25% airflow through the material, helping reduce wind loading compared with a completely solid PVC banner.

Are Heras fence banners suitable outdoors?

Yes. They are designed for outdoor applications such as construction sites, developments and events, provided the fencing and banners are installed appropriately.

Can you make banners for round-top Heras fencing?

Yes. A 130mm angled corner option is available and works particularly well with round-top Heras fencing panels.

Can I have square corners?

Yes. Square-corner banners are also available.

How are Heras banners attached?

They can be secured to the fencing using bungee ball ties.

Can I put a banner on both sides of the fence?

Yes. Two banners can be fitted to the same panel, although some graphic show-through may occur because the material is mesh.

Can you make bespoke sizes?

Yes. Although the standard product is designed for conventional Heras fencing, we can produce alternative dimensions to suit other requirements.

Can one design run across several fencing panels?

Yes. Multi-panel graphics can be produced. As a general guide, continuous banner widths should normally remain below approximately 30 metres, and longer graphics may be printed in sections and welded together.

Are Heras banners fire rated?

The mesh material is available with an M1/B1 fire rating. If your project has a specific requirement, tell us before ordering.

Can you help with large construction-site graphics?

Yes. Send us the number of panels, approximate dimensions and intended artwork and we can advise on the most appropriate way to produce the graphics.